Knobs - Leslie HalfMoon Switch
|
Quit cutting your fingers and replace that missing cap for your old Half Moon Leslie Switch. |
$5.00/EA
|
Hammond Oil, 4 oz
|
Oil your organ with Style using Genuine Hammond type Oil, accept no substitutes as this specially formulated oil is the only correct oil for your Hammond organ.Four Ounce size. Product may vary from in appearance from photo shown. |
$8.25
|
|
Knobs - 5pk Leslie HalfMoon Switch
|
Quit cutting your fingers and replace that missing cap for your old Half Moon Leslie Switch. 5 pack. |
$19.95/5-Pack
|
Jansen Organ Trucks, 23"
|
Deliveries using only one man. Instantaneous control at your fingertips. Spring-loaded plunger allows swivel wheels to be locked for one man operation or swivel in unlocked position for two man operation. Available for immediate drop ship- $50 shipping and handling to any address in 48 states. Email for other delivery locations. In-Store Pricing Different. 23" X 5" Angle base (for pianos and organs) |
$429.00/EA
|
|
Jansen Organ Trucks, 28"
|
Deliveries using only one man. Instantaneous control at your fingertips. Spring-loaded plunger allows swivel wheels to be locked for one man operation or swivel in unlocked position for two man operation. Available for immediate drop ship - $50 shipping and handling to any address in 48 states. Email for other delivery locations. IN-STORE pricing different 28" X 4" Angle base (Hammond B3, organs with legs on front, large organs) |
$429.00/EA
|
EPM-3 Expression Pedal Mat -Old Style Brown
|
These mats are exact replacements for the expression pedal mats used on EARLIER Hammond organs with the wooden expression pedals where the mat wraps around the expression pedal. The mats are die cut and have a self adhesive backing. Made by Trek II in Brown only. |
$17.00
|
|
EPM-2 Expression Pedal Mat, Black
|
These mats are exact replacements for the expression pedal mats used on later Hammond organs with metal or plastic expression pedals. The mats are die cut and have a self adhesive backing. Made by Trek II EPM-2 is the BLACK color. |
$10.00
|
|
EPM-1 Expression Pedal Mat, Brown
|
These mats are exact replacements for the expression pedal mats used on later Hammond organs with metal or plastic expression pedals. The mats are die cut and have a self adhesive backing. Made by Trek II EPM-1 is the BROWN color. |
$10.00
|
Trek II TBS-1 Bright Brass Thumbscrews
|
Exact reproductions of the solid brass thumb screws used to secure the back panels of later standard Hammond Consoles. TBS-2 Bright Brass Finish. By Trek II - comes two to the package. |
$26.00/set
|
|
Trek II TBS-2 Classic Brown Thumbscrews
|
Exact reproductions of the thumb screws used to secure the back panels of standard Hammond Consoles. TBS-2 Classic Brown Finish. By Trek II. Comes two to the package. |
$26.00/set
|
Trek II GNR-1A Generator Note Replacement
|
A cost effective alternative to removing and disassembling Hammond tone wheel generators when defective frequencies are encountered. Simple three wire installation. Generates a sine wave output of any tone wheel frequency. The GNR-1A has a built in power supply and will replace one frequency. Manufactured in USA by Trek II |
$153.00
|
Trek II GNR-2A Generator Note Replacement
|
The GNR-2A will replace a single additional frequency when used with the GNR-1A, but has no power supply, relying on that of the GNR-1A. As many as three GNR-2A units may be powered by a single GNR-1A. |
$92.00
|
Leslie Cable, Bulk 6 conductor, 1000' rolls
|
Bulk cable, 6 pin cable as used in Organ to Leslie and Organ to Tone Cabinet Cables specially priced, 1000' rolls 124 lb spool will ship UPS |
$1,350.00/ft
|
Leslie Cable, Bulk 6 conductor
|
Bulk cable, 6 pin cable as used in Organ to Leslie and Organ to Tone Cabinet Cables |
$1.55/ft
|
RSP-1 Start/Run Switch Plate
|
RSP-1 Start/Run Switch Plate. Machined from heavy gauge aluminum. Replaces the thin stamped plates used on later A-100, B-3 and C-3 Hammond consoles. Black anodized finish. Manufactured by Trek II |
$24.00
|
Trek II RSP-0 Blank Switch Plate
|
RSP-0 is Identical to the RSP-1, but without the switch holes and lettering. Useful for covering the reverb control opening in A-100 organs and other custom applications. |
$24.00/EA
|
Hammond Start Switch
|
Replacement Hammond organ Start Switch for tonewheel organs that are not self starting, such as B3, C3, D, M3, etc. |
$15.00
|
Trek II RSP-MTG MOUNTING SCREWS
|
Exact replacement for the #841-000001 small black oval head mounting screws used to secure switch plate. Replaces missing or damaged originals.
Set of 4 |
$4.50/EA
|
Hammond B3 Key
|
Lock and Unlock your Hammond B3 again with a new Key. Also good for additional keys for multiple organists to have. |
$9.99/EA
|
Hammond B3 "JailHouse" Style Key
|
Lock and Unlock your Hammond B3 again with a new Key. Also good for additional keys for multiple organists to have. After 1969 or so the key style changed from the earlier style to this Jailhouse or Skeleton key type style. |
$9.99/EA
|
Hammond C3 Key
|
Lock and Unlock your Hammond C3 again with a new Key. Also good for additional keys for multiple organists to have. |
$9.99/EA
|
Bussbar Lube Substitute
|
Use TunerLube to lube up your bussbars with this respected substitute for the original bussbar lube which is no longer available. Clean your noisy keyboards and drawbars, rub off the bussbars with alcohol, put on some tuner lube and put em back in....Ah, no more snap crackle and pop. "A Little Dab'll Do Ya" |
$12.50
|
Trek II CSP-1 Case Scratch Protector
|
CSP-1 Case Scratch Protector by Trek II. These thin fiberglass sheets are shaped to fit between the keyboards and case of standard Hammond consoles to prevent woodwork damage when raising or removing manuals. Made from durable 1/32" G-10 fiberglass with rounded corners. Set of Two. |
$39.00/Set
|
Trek II TP-2B Percussion
|
Adds the famous B-3 type percussion sound to pre-B-3 consoles. Mounts in place of the upper left hand end block. |
$242.00
|
B+ Supply for CV, BV, BC and older Hammonds
|
This little box allows you to make your A, AB, BV, BCV, CV, D, DV, E organs self contained for power, and not dependent on a tone cabinet or Leslie for power. |
$122.00
|
Pedal Spring Replacements
|
New reproductions of the Pedal Spring assembly used in 25 note standard Hammond consoles. (B3, C3, C2, CV, A, AB, etc) |
$9.51
|
Trek II RV-1C Reverb Unit
|
Reverb unit for use in most standard Hammond consoles. Specify model of organ when ordering. |
$316.00/EA
|
Trek II SB-2500B String Bass Unit
|
Provides 25 notes of deep rich bass with sustain and pluck effect. Installs in standard consoles utilizing the existing pedal switch contacts. Separate 8' and 16' outputs function with the existing pedal drawbars. |
$412.00/EA
|
DeOxit 5 Electronic Lube Spray
|
This is THE Contact spray cleaner you need for any organ service work |
$15.12
|
Trek II CPR-28 B3/C3 Preamp Rebuild kit
|
The Trek II ® CPR-28 is a premium product designed to provide technicians with the means to restore like-new operation to aging AO-28 pre-amps. These pre-amps were used in classic Hammond® A-100, B-3, C-3, D-100 and RT-3 organs. The CPR-28 replaces every resistor and fixed capacitor in the pre-amp including the two multi-section can capacitors. While not every tonewheel organ may warrant this level of restoration, the CPR-28 is provided for those organs requiring the very highest level of quality and reliability in the AO-28. |
$403.00/EA
|
Start Switch Replacement
|
Direct replacement start switch for Hammond B3/C3/RT3/A100 etc. |
$18.00/EA
|
Trek II OBL-2 Line Output Box
|
The OBL-2 allows standard Hammond consoles to be connected via a 1/4" output jack to an external amplification system. The box is made from heavy gauge anodized aluminum and easily mounts under the generator shelf or other convenient location. The unit has both an overall output and one that is low pass filtered. The low pass output is useful when using a bass amp to reinforce the organ low end. A level control is provided to allow the output signal to be adjusted to match the amplifier input requirements. |
$72.00/EA
|
Trek II ELB-1A Effect Loop for Hammond Organs
|
Adds an INSTRUMENT LEVEL effects loop to allow the use of guitar pedal type effects devices on either the upper or lower manual of many Hammond organ models. Two units can be used for an effects loop on each manual. |
$102.00/EA
|
New Main/Ensemble/Echo Assembly- Half Moon
|
Exact reproduction of the original, minus the brand name. Made of Bakelite. Add your own wire, and off you go! Includes 3 position switch and cap. |
$79.00/EA
|
New Chorale/Tremolo Assembly- Half Moon
|
Exact reproduction, minus the brand name. Made of Bakelite. Add your own wire and off you go! Includes 2 position switch and cap. |
$79.00/EA
|
Trek II BE-2A
|
BE-2A BLANK STEEL Right Side End Blocks |
$35.00
|
|
Trek II BE-1A
|
BE-1A BLANK STEEL Left Side End Blocks |
$48.00
|
FS-100 Front Strip, Lower Manual
|
For later standard Hammond consoles such as the A-100 series, B-3 and C-3. Durable black finish with fine texture. Complete with KBF-1 upstop felt and mounting screws. FS-100 strip is for the Lower manual. Made by Trek II |
$74.00
|
|
FS-300 Front Strip, Upper Manual
|
For later standard Hammond consoles such as the A-100 series, B-3 and C-3. Durable black finish with fine texture. Complete with KBF-1 upstop felt and mounting screws. The FS-300 are screened with the classic gold Hammond logo. Express permission for this use has been granted by
Hammond Suzuki. Made by TREK II |
$81.00
|
|
FS-SET Front Strips, Upper & Lower Manuals
|
For later standard Hammond consoles such as the A-100 series, B-3 and C-3. Durable black finish with fine texture. Complete with KBF-1 upstop felt and mounting screws. The FS-SET is a set containing the FS-300 and FS-100 to cover both manuals. The FS-300 are screened with the classic gold Hammond logo. Express permission for this use has been granted by
Hammond Suzuki. Made by TREK II |
$143.00/set
|
Trek II SSP-1C Solid State Preamp
|
Replaces the AO-15331 two tube (#56-#57) pre-amps used in very early standard Hammond consoles. |
$206.00
|
Trek II SSP-3A Solid State Preamp
|
Replace that old tube B3/C3 Style Preamp with this Solid State Preamp made for the job. |
$620.00
|
BTC-2A BASS, TREBLE, PERCUSSION, AND OVERALL LEVEL CONTROL END BLOCK
|
This option provides precise control over the organ's bass, treble, percussion and overall level. The BTC-2A mounts in place of either left end block and gives the organist the ability to tailor the sound while performing. |
$190.00/EA
|
Trek II BTC-1A BASS, TREBLE, PERCUSSION, AND OVERALL LEVEL CONTROLS
|
This option provides precise control over the organ's bass, treble, percussion and overall level. Mounted on the SSP-3A chassis, these controls allow the organ owner to set sound to his preference and not have to worry about other organists tampering with the settings. |
$65.00/EA
|
Trek II SSP-3A Preamp With Aux Channels Option for SSP-3 Preamp
|
AUXILIARY AMPLIFIER CHANNELS. Provides 2 additional amplifier channels and a separate enclosure with input jacks, output jacks and level controls. These channels may be used to play other keyboard instruments, rhythm units, etc. through their own amplification system, but under the control of the organ swell pedal. In addition, either input can be routed through the organ sound system by moving a jumper on the circuit board. When configured this way, the AUX-1 input will be expressed, and the AUX-2 input will be un-expressed. |
$620.00/EA
|
ELB-3A EFFECTS LOOP OPTION FOR SSP-3A
|
This option provides a separate enclosure with LINE LEVEL effects send and return jacks for adding the effects device of your choice to the SSP-3A. To add an INSTRUMENT LEVEL effects loop to your organ, use the ELB-1A. |
$74.00/EA
|
TP-3B Percussion Control Head
|
Option for SSP-3 Preamp: Adds B3 type percussion switching to older consoles with SSP-3 Preamp. Only use with SSP-3 Preamp. |
$206.00/EA
|
ETS-2 Echo/Tremolo Switch
|
Provides all the features of the TS-2 with the addition of a three position ECHO / ENSEMBLE / MAIN switch compatible with 4H echo kit tone cabinet switching. This works only if you have the old Leslie 122 or 22 switching kits already installed - i.e. to replace existing switches for an existing 122 kit that already has echo/main switching built in. This does not provide the switching if the echo/main switching kit is not already installed. This works well WITH the Hampton H122SK2 kit. |
$120.00/EA
|
Trek II TS-2 Tremolo Switch
|
Mounts in place of the lower left hand end block on standard Hammond consoles. Allows convenient rocker switch control of the tremolo function. This works well for the 147 style switching with no particular kit, and also for 122 style switching with Hampton's H122SK1 kit. |
$83.00/EA
|
Trek II KBF-2 Keyboard Downstop Felt
|
The KBF-2 is an exact reproduction of the #042-001701 B-3 type downstop felt. An essential part of any Hammond console restoration or busbar lube job, it helps restore the "new feel" and quiet operation to the keyboard.
|
$13.00/EA
|
Trek II KBF-1 Keyboard Upstop Felt
|
The KBF-1 is an exact reproduction of the B-3 type upstop felt. An essential part of any Hammond console restoration or busbar lube job, it helps restore the new feel and quiet operation to the keyboard. Supplied by Trek II. Easily installed on late A-100, B-3, C-3, and D-100 organs. Sold by the EACH - Order Two if you want to do both manuals! |
$8.00
|
OBX-0 Outlet Box
|
The OBX series of outlet boxes are the same size, shape and color as those originally provided on BV, B-2, and B-3 organs. OBX units may be used to replace damaged or missing outlet boxes as well as to upgrade older consoles not originally equipped with outlet boxes. OBX-0 is provided with no knockouts or connectors. Made by Trek II |
$61.00
|
|
OBX-2 Outlet Box
|
The OBX series of outlet boxes are the same size, shape and color as those originally provided on BV, B-2, and B-3 organs. OBX units may be used to replace damaged or missing outlet boxes as well as to upgrade older consoles not originally equipped with outlet boxes. The OBX-2 Pre-wired with an original style two conductor AC input connector and 1 tone cabinet connector. Made by Trek II |
$117.00
|
|
OBX-3 Outlet Box, 2 Prong AC, 1 Jack, 3 knockouts
|
The OBX series of outlet boxes are the same size, shape and color as those originally provided on BV, B-2, and B-3 organs. OBX units may be used to replace damaged or missing outlet boxes as well as to upgrade older consoles not originally equipped with outlet boxes. The OBX-3 is provided with 3 knockouts for additional tone cabinet connectors. Made by Trek II |
$117.00
|
Trek II OBX-MTG Outlet Box Mounting Kit
|
The optional OBX-MTG mounting kit may be used to install the OBX style outlet boxes in A-100 organs, cut downs, or other applications where mounting to a flat surface is desired. |
$15.00/EA
|
Hammond Organ Output Transformer Cover, Grey
|
Cover for AO29 or AO28 Output Transformer. |
$10.00/EA
|
|
Hammond Organ Output Transformer Cover, Black
|
Cover for AO29 or AO28 Output Transformer. |
$10.00/EA
|
New Old style Hammond B3/C3/A100 Power Transformer
|
Exact replacement Hammond Organ AO-28 Power Transformer 110V Version |
$190.00/EA
|
Hammond M series Output transformer
|
Exact replacement for all M2/M3 output transformers. Same mounting etc. Cover not included |
$130.00/EA
|
SC60-D2 Frequency Conversion Kit (B3 Style)
|
B3/C3/A-100 StyleAllows organ to play precisely in tune even in countries where the line frequency is not 60 HZ or locations where the line frequency is not stable or accurate. SC-60D-2 For non self starting organs |
$411.00/EA
|
|
SC60-D1 Frequency Conversion Kit
|
Allows self-starting (H-100, E-100 etc) organ to play precisely in tune even in countries where the line frequency is not 60 HZ or locations where the line frequency is not stable or accurate. Use SC-60D-1 For self starting organs |
$358.00/EA
|
Nothing!
|
Click this and order this to provide your credit card information for a verbal order or if instructed. |
$0.01/EA
|